change from cisco to mikrotik

Hardware MikroTik hardware general
1

Dear all
I’m planning to change my cisco Switch SG300-28PP 28-Port Gigabit PoE+ Managed Switch to MikroTik Switch at least 26 port PoE+ but with seam cisco specs because all Wi-Fi AP, phone,PBX and security cameras work with PoE+

any recommendation from you

With Regards

2

Dont do it. Unless you really want to.

3

thanks toxicfusion for your reply
the reason that i want to change cisco because i cut off the power from cisco during update process and now it’s not working anymore this way and the dealer can’t repair it
with regards

4

Check herehttps://mikrotik.com/products/group/switches
Take a look at the CRS3xx series switches …

5

Have you tried with NetInstall? :laughing:


Sorry… :unamused:

6

:laughing:

I am sorry too!

Check out the Mikrotik CRS328-24P-4S+RM
Bang for the buck the best Switch ever!

7

If you need more then 24 poe-out ports in one device, then, currently, the only option is CRS354-48P-4S+2Q+RM
https://mikrotik.com/product/crs354_48p_4s_2q_rm

8

thanks for all
but i don’t think to change from cisco to mikrotik switch because i have hEX PoE port 2 to 5 poe out and hEX S port 5 poe out but none of them are really providing poe out i’ve test the with ip phone and AP both of them are support poe and when i connect them none of them are working that means there is an issue with poe in mikrotik device so i plan to buy a new cisco device that really provide poe out for all 24 ports

best regards

9

You might find this helpful

https://stubarea51.net/2019/02/06/cisco-to-mikrotik-switching-and-vlans/

10

What do you mean with “..none of them are really providing poe out..”?
What devices are you trying to power, what are their poe-in specification? What PSU are you using?
Please read the device specification before the purchase: The ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.
https://mikrotik.com/product/RB960PGS

If you are sure that you are using a proper setup and the hEX PoE might be defective, please, do not hesitate and write to support@mikrotik.com

11

thanks Elans
this is it grandstream ip phone GVX3370
https://www.grandstream.com/hubfs/Product_Documentation/datasheet_gxv3370_english.pdf?hsLang=en

and the other device from greandstream GWN7610
https://www.grandstream.com/hubfs/Product_Documentation/datasheet_gwn7610_english.pdf?hsLang=en

i just want to use mikrotik devices hEx s and hEx PoE as a switch
i meant both of hEx s and hEx Po not really provide proper voltage

12

You need to use 48V adapter, not standard 24V which is delivered with hex devices.