Hi
This is a trail set up and the management with winbox is not possible.
Cisco on port 1 multiple VLAN’s PC on port 8.
OS v6.34.2
Device will show in Winbox on port 8 and on cisco side of network but unable to connect by ip or MAC.
/interface ethernet
set [ find default-name=ether2 ] master-port=ether1
set [ find default-name=ether3 ] master-port=ether1
set [ find default-name=ether4 ] master-port=ether1
set [ find default-name=ether5 ] master-port=ether1
set [ find default-name=ether6 ] master-port=ether1
set [ find default-name=ether7 ] master-port=ether1
set [ find default-name=ether8 ] master-port=ether1
/interface vlan
add interface=ether1 name=vlan15 vlan-id=15
/interface ethernet switch egress-vlan-tag
add tagged-ports=ether1,switch1-cpu vlan-id=15
/interface ethernet switch ingress-vlan-translation
add customer-vid=0 new-customer-vid=15 ports=ether7,ether8,switch1-cpu
/interface ethernet switch vlan
add ports=ether1,ether8 vlan-id=15
/ip address
add address=192.168.15.250/24 interface=vlan15 network=192.168.15.0
I have been on this for 3 days looked at many samples but keep getting stuck on winbox the rest works.
Thanks,