Has anyone got experience getting STP working with RouterOS 6.41’s revised bridging implementation?
We historically create rstp bridges and then add vlan or bond interfaces to translate, add or pop tags.
We wish to implement layer2 redundancy towards Cisco switches but Mikrotik doesn’t provide MultiChassis LACP (mLACP). Cisco documentation:
https://www.cisco.com/c/en/us/td/docs/ios/cether/configuration/guide/ce_mlacp.html
The following Forum thread indicates that Cisco’s PVSTP implementation is incompatible with MikroTik’s CST implementation:
http://forum.mikrotik.com/t/rstp-multiple-vlans-with-cisco-switches/90198/1
I was hoping someone has an example to configure MSTP in RouterOS. This is listed as supported here:
https://wiki.mikrotik.com/wiki/Manual:Interface/Bridge
Cisco STP modes are PVST+, Rapid PVST+ or MSTP:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_53_se/configuration/guide/2960scg/swstp.html