It iseems to me the same question you posted yesterday, only worded differently.
The answer remains the same:
New Box, Need Winbox Threw Ether1
About the *6 compare with point #21 here:
GP & CSA for Mikrotik devices
You placed ether1 in a bridge (why?) that right now has no name and is not part of either LAN or WAN.
Unless there is a specific reason, the usual advice is to have ONLY ONE bridge on a single device.
When in an export there is a # leading a line, it is a warning or error, the router is trying desperately to tell you that something is "off" on the forum (markdown) the # sign means "bold, bigger":
in/out-interface matcher not possible when interface (LAN2) is slave - use master instead (LANBridge)
add action=masquerade chain=srcnat out-interface=LAN2 src-address=10.9.1.0/24
Ah, and before I forget, check Rule #5:
The twelve Rules of Mikrotik Club