Cloud core router routing firewall question

RouterOS Beginner Basics
1

Hi and tnx for ur help :slight_smile:


I have a cloud core router for a little WISP i use mangle for make a QoS with 3 Wan’s and i have this initial setup:

For security i tried to separate all gateways for clients (in each gateway i have one bridge+ap).

And i wan’t to acces to all CPE’s with ETH1 or ETH2 (its the unique bridged’s ethernets) and i cant ping or acces to another computers in Eth3, 4 and 5.

Whats the way for enable acces to one ip (ex. 192.168.1.4) to all another ethernets and ips? Routes? some ppl say me i need to put all in bridge but i think more secure for the network don’t put in bridge.

I’m noob and maybe is safe put all in one bridge and use firewall filter for drop acces between interfaces anyone can explain the best safer way?

Thanks for your help and time and Happy networking :slight_smile:

2

Routing is generally a better way to go vs. bridging especially when dealing with WISPs.

3

Thanks for your response :slight_smile:

Can you make me an example how to route one ip to all another ethernets because i tried a lot of things and i can’t make it :frowning: