Cloud keep show status: updating...

Derek · January 19, 2025, 3:46pm

I’m using a RB5009, and want to use cloud as my ddns, after trying to enable the cloud, i get this in cloud status,

> /ip cloud print
          ddns-enabled: yes
  ddns-update-interval: none
           update-time: no
              dns-name: ***.sn.mynetname.net
                status: updating...
      back-to-home-vpn: revoked-and-disabled

I’m comfirm My router time is correctly using ntp, didn’t work.

try to enable and disable static domain cloud2.mikrotik.com and cloud.mikrotik.com but still didn’t work.

allow firewall on udp 15252, 53 and 123 to enable the router can received data, but still didn’t work.

does anyone know what am I config wrong, hoping to get answer.

Thank you.

BartoszP · January 19, 2025, 9:06pm

Hi,

Does your router resolves properly that DNS names?
Can you ping the World from CLI?
Set “update interval” to eg. 5 min instead of “none”.

Derek · May 3, 2025, 8:07am

sorry for the long reply, I’m trying the other approach for DDNS(fetch to no-ip),

but still not work, but that another story.

For Cloud DDNS update,

I did able to ping cloud2.mikrotik.com and get the ip
擷取.PNG
what should I do next?

erlinden · May 3, 2025, 9:32am

allow firewall on udp 15252, 53 and 123 to enable the router can received data, but still didn't work.

Does this mean your DNS server is publically available? That could explain the high rtt.

You might want to share your config:

/export file=anynameyoulike

Remove serial and any other private info, post between code tags by using the </> button.

Derek · May 4, 2025, 4:24pm

thank you for the help, here are the code

I find out I’m using static DNS to resolve IP,
the domian cannot ping after disable static DNS

what should I do to make routerOS able to using DNS server and ping?

# 2025-05-05 00:00:14 by RouterOS 7.18.2
# software id = HKJ2-B1GR
#
# model = RB5009UG+S+
# serial number = HEH08
/interface bridge
add admin-mac= auto-mac=no comment=defconf dhcp-snooping=yes \
    name=bridge port-cost-mode=short
/interface wireguard
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/ip pool
add name=dhcp ranges=192.168.8.10-192.168.8.254
add name=wifi ranges=192.168.20.100-192.168.20.200
/ip dhcp-server
add address-pool=dhcp interface=bridge lease-time=10m name=defconf
add address-pool=wifi interface=ether8 lease-time=5h name=wifiDHCP
/ip smb users
set [ find default=yes ] disabled=yes
/interface bridge port
add bridge=bridge comment=defconf interface=ether2 internal-path-cost=10 \
    path-cost=10 trusted=yes
add bridge=bridge comment=defconf interface=ether3 internal-path-cost=10 \
    path-cost=10 trusted=yes
add bridge=bridge comment=defconf interface=ether4 internal-path-cost=10 \
    path-cost=10
add bridge=bridge comment=defconf interface=ether5 internal-path-cost=10 \
    path-cost=10
add bridge=bridge comment=defconf interface=ether6 internal-path-cost=10 \
    path-cost=10
add bridge=bridge comment=defconf interface=ether7 internal-path-cost=10 \
    path-cost=10
add bridge=bridge comment=defconf interface=sfp-sfpplus1 internal-path-cost=10 \
    path-cost=10
/ip firewall connection tracking
set udp-timeout=10s
/ip neighbor discovery-settings
set discover-interface-list=LAN lldp-med-net-policy-vlan=1
/interface detect-internet
set detect-interface-list=all
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1 list=WAN
add interface=ether8 list=LAN
add interface=vpn list=LAN
/interface ovpn-server server
/interface wireguard peers

/ip address
add address=192.168.8.1/24 comment=defconf interface=bridge network=192.168.8.0
add address=192.168.20.1/24 interface=ether8 network=192.168.20.0
add address=192.168.11.1/24 interface=vpn network=192.168.11.0
/ip cloud
set ddns-update-interval=5m
/ip cloud advanced
set use-local-address=yes
/ip dhcp-client
add comment=defconf interface=ether1 use-peer-dns=no
/ip dhcp-server network
add address=10.120.8.0/24 comment=defconf dns-server=1.1.1.1,8.8.8.8 gateway=\
    10.120.8.1 netmask=24
add address=192.168.20.0/24 dns-server=1.1.1.1,8.8.8.8 gateway=192.168.20.1 \
    netmask=24
/ip dns
set allow-remote-requests=yes servers=1.1.1.1,8.8.8.8
/ip dns static
add address=192.168.8.1 address-list=192.168.8.0/24 comment=defconf name=\
    router.lan type=A
add address=192.168.20.1 address-list=192.168.20.0/24 name=wifihost type=A
add address=223.255.185.3 name=stdtime.gov.hk type=A
add address=159.148.172.251 name=cloud2.mikrotik.com type=A
add address=159.148.147.229 name=cloud.mikrotik.com type=A
add address=158.247.7.204 disabled=yes name=dynupdate.no-ip.com type=A
add address=159.148.172.226 name=upgrade.mikrotik.com type=A
/ip firewall address-list
add address=192.168.11.0/24 list=vpn_list
/ip firewall filter
add action=drop chain=forward comment=\
    "defconf: accept established,related,untracked" connection-state=\
    established,related,untracked disabled=yes in-interface-list=WAN protocol=\
    icmp
add action=drop chain=forward disabled=yes dst-port=80,22,443,8291 \
    in-interface=ether1 protocol=tcp
add action=accept chain=input protocol=udp src-port=53
add action=accept chain=input dst-port=53 protocol=udp
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
    invalid
add action=accept chain=forward disabled=yes in-interface-list=LAN \
    out-interface-list=WAN
add action=accept chain=input dst-port=13355 in-interface=ether1 protocol=udp
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=output comment="Allow HTTP traffic" dst-port=80 \
    protocol=tcp
add action=drop chain=forward out-interface-list=WAN src-address-list=\
    "server"
add action=drop chain=input comment="defconf: drop all not coming from LAN" \
    in-interface-list=!LAN
add action=accept chain=forward comment=\
    "defconf: accept established,related, untracked" connection-state=\
    established,related,untracked
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
    connection-state=established,related hw-offload=yes
add action=accept chain=input comment=\
    "defconf: accept to local loopback (for CAPsMAN)" dst-address=127.0.0.1
add action=accept chain=forward comment="defconf: accept in ipsec policy" \
    ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" \
    ipsec-policy=out,ipsec
add action=drop chain=forward comment="defconf: drop invalid" \
    connection-state=invalid
add action=drop chain=forward comment=\
    "defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
    connection-state=new in-interface-list=WAN
add action=accept chain=forward
add action=accept chain=forward disabled=yes
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" \
    out-interface-list=WAN
/ip firewall service-port
set sip disabled=yes
/ip ipsec profile
set [ find default=yes ] dpd-interval=2m dpd-maximum-failures=5
/ip service
set telnet disabled=yes
set ftp disabled=yes
set www disabled=yes
set ssh address=LAN
set winbox address=LAN
/ip smb shares
set [ find default=yes ] directory=/pub
/ip ssh
set strong-crypto=yes
/ip traffic-flow
set enabled=yes
/ipv6 firewall address-list
add address=::/128 comment="defconf: unspecified address" list=bad_ipv6
add address=::1/128 comment="defconf: lo" list=bad_ipv6
add address=fec0::/10 comment="defconf: site-local" list=bad_ipv6
add address=::ffff:0.0.0.0/96 comment="defconf: ipv4-mapped" list=bad_ipv6
add address=::/96 comment="defconf: ipv4 compat" list=bad_ipv6
add address=100::/64 comment="defconf: discard only " list=bad_ipv6
add address=2001:db8::/32 comment="defconf: documentation" list=bad_ipv6
add address=2001:10::/28 comment="defconf: ORCHID" list=bad_ipv6
add address=3ffe::/16 comment="defconf: 6bone" list=bad_ipv6
/ipv6 firewall filter
add action=accept chain=input comment=\
    "defconf: accept established,related,untracked" connection-state=\
    established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
    invalid
add action=accept chain=input comment="defconf: accept ICMPv6" protocol=icmpv6
add action=accept chain=input comment="defconf: accept UDP traceroute" port=\
    33434-33534 protocol=udp
add action=accept chain=input comment=\
    "defconf: accept DHCPv6-Client prefix delegation." dst-port=546 protocol=\
    udp src-address=fe80::/10
add action=accept chain=input comment="defconf: accept IKE" dst-port=500,4500 \
    protocol=udp
add action=accept chain=input comment="defconf: accept ipsec AH" protocol=\
    ipsec-ah
add action=accept chain=input comment="defconf: accept ipsec ESP" protocol=\
    ipsec-esp
add action=accept chain=input comment=\
    "defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec
add action=drop chain=input comment=\
    "defconf: drop everything else not coming from LAN" in-interface-list=!LAN
add action=accept chain=forward comment=\
    "defconf: accept established,related,untracked" connection-state=\
    established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" \
    connection-state=invalid
add action=drop chain=forward comment=\
    "defconf: drop packets with bad src ipv6" src-address-list=bad_ipv6
add action=drop chain=forward comment=\
    "defconf: drop packets with bad dst ipv6" dst-address-list=bad_ipv6
add action=drop chain=forward comment="defconf: rfc4890 drop hop-limit=1" \
    hop-limit=equal:1 protocol=icmpv6
add action=accept chain=forward comment="defconf: accept ICMPv6" protocol=\
    icmpv6
add action=accept chain=forward comment="defconf: accept HIP" protocol=139
add action=accept chain=forward comment="defconf: accept IKE" dst-port=\
    500,4500 protocol=udp
add action=accept chain=forward comment="defconf: accept ipsec AH" protocol=\
    ipsec-ah
add action=accept chain=forward comment="defconf: accept ipsec ESP" protocol=\
    ipsec-esp
add action=accept chain=forward comment=\
    "defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec
add action=drop chain=forward comment=\
    "defconf: drop everything else not coming from LAN" in-interface-list=!LAN
/snmp
set enabled=yes
/system clock
set time-zone-name=Asia/Hong_Kong
/system logging
add topics=dns
add topics=fetch
/system note
set show-at-login=no
/system ntp client
set enabled=yes
/system ntp client servers
add address=stdtime.gov.hk
/system routerboard settings
set auto-upgrade=yes
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN

here are the dns status on routeros

[admin@MikroTik] /ip/dns> print
                      servers: 1.1.1.1
                               8.8.8.8
              dynamic-servers:        
               use-doh-server:        
              verify-doh-cert: no     
   doh-max-server-connections: 5      
   doh-max-concurrent-queries: 50     
                  doh-timeout: 5s     
        allow-remote-requests: yes    
          max-udp-packet-size: 4096   
         query-server-timeout: 2s     
          query-total-timeout: 10s    
       max-concurrent-queries: 100    
  max-concurrent-tcp-sessions: 20     
                   cache-size: 2048KiB
                cache-max-ttl: 1w     
      address-list-extra-time: 0s     
                          vrf: main   
           mdns-repeat-ifaces:        
                   cache-used: 75KiB

Derek · May 4, 2025, 6:52pm

allow firewall on udp 15252, 53 and 123 to enable the router can received data, but still didn't work.
Does this mean your DNS server is publically available? That could explain the high rtt.

You might want to share your config:
/export file=anynameyoulike
Remove serial and any other private info, post between code tags by using the </> button.

thank you for the help ,
the ip cloud service is not working after I reset the firewall, I think I miss config something