Configuration Issues

RouterOS Beginner Basics
1

Hey there,
At the office we bought an RB2011 UAS-RM
Now the network setup is as follows

FTU (Fiber Termination Unit) → RB2011

I’ve got an 100/100 Fiber connection which is setup using PPPoE
For so far I managed to get the connection up and running. But there are a few things which I can’t seem to find out.

I can do DNS lookups, but i can’t do pings or traceroutes with any device, the mikrotik however can

Now this is the setup how I would want it:
Ether1: Incomming fiber connection
Ether2: NAT Clients on the primary PPPoE Ip
Ether3: Server 1
Ether4: Server 2
Ether5: Server 3

Now I’ve got an 8-IP block from my ISP, but using google I can’t find out how to setup this IP block..

Thanks for any help! :slight_smile:

ShadowAs1

2

Can you post your current config (/export compact)
Did you create a NAT rule for outgoing traffic?

3

I can’t post the config at the moment. The office is closed for 1 week, so after that I’ll be able to.
And yes, I did create one.