good evening everybody (i need urgent help?)
i can’t configure the mikrotik 450g mikrotik router at all.
i have done all the thins but not done
can any body send me me the example for how to share the inernet connecction.
and i also read the topics but not clear
with regard from
suraj
one more thing i have noticed that only orange light is coming and green light is not buring.
is there any problem with 450g router.
and about setting
wan ip 10.210.2.1 for wan and for lan 192.168.1.1 for lan
than i configure dhcp client and the interfece is wan
and then dhcp server
and nat chain =srcnat
out interneface is =wan
action is =masqurade
can you provide me the set up example???
it will be helpful for me 
one more thing i have noticed that only orange light is coming and green light is not buring.
is there any problem with 450g router.
Possibly. Console in - does the link show up? Does that cable work when you plug it into something else?
Everything else you’re asking about is covered by the wiki article I posted.
thanks for your reply
but still there is a problem
when i conifgured everything and set the lan card for obtaining ip from dhcp server ,it shows up another ip subnet
for example 10.0.3.144/24 and gateway 10.0.3.98
but i set the wan ip to 10.210.2.5/24 and lan ip 192.168.1.1/24
and when i check the dhcp client on router there is another ip subnet selected there ???
i have resetted the router two or three time but every time same things happen
and the new ip that is configured on ip add box that’s interface is wan
i am so confisued \
plz help
got it
it was so easy