Configuring a Wireless Bridge connection

RouterOS Beginner Basics
1

I’ve finally got my Routerboard 433 working properly.
The manual doesn’t describe configuring a bridged connection, so I’m here.

What I have:

I have one Wireless AP-Bridge with an SSID of “office” this access point is connected to the router where the DSL connection resides.

I have a second Wireless Client-Bridge set up with an SSID of “home” this is where I want to bridge the wireless to.

My Routerboard has two Atheros 2.4ghz radios.


What I need is to know is what settings to I need to use to bridge these two connections.

I do not want NAT or anything else, I would like all traffic to pass-through (just like a switch would handle the traffic).


All your help is greatly appreciated.

2

Actually the manual does have that example. See http://www.mikrotik.com/testdocs/ros/2.9/interface/wireless_content.php#4.13.21.2.

You can also refer to the Wiki with two articles:

http://wiki.mikrotik.com/wiki/Transparently_Bridge_two_Networks

and

http://wiki.mikrotik.com/wiki/Transparently_Bridge_two_Networks_without_using_WDS_(EoIP)