Connect to mesh network with lan

RouterOS Wireless Networking
1

Hi,

I’ve successful build a mesh network with three rb751 units. I followed the wds mesh howto and some youtube vids for doing this.
I have only one problem with this setup. I have an exisiting lan network with 192.168.133.0/24 subnet, but the mesh is using a different (192.168.100.0/24) subnet.
I want to only one subnet. How can I setup this? At this moment I have a nat masquarade beetwen eth1 and mehs-interface.

Is is possible? I cannot find any information about this.
If yes, please help me.

Best regards,

Tibor

2

you can add ethernet/bridge interface to a mesh

interface mesh add interface=ether1 mesh=mesh-iface