Connect to my public IP inside my LAN

RouterOS Beginner Basics
1

Hello everyone.

Here is my case;
I setup firewall rules to open specific ports, everything is working on it. I can connect easily from other places over my public IP, but if I try to connect with my public IP from my LAN, that is in the same RouterBOARD is not working.
I think I’m missing something, should I make some route or IP tunnel to my public IP work inside my LAN?


Sorry for my bad english :frowning:

2

i think you need to setup your routes correctly. and let the pc know which is the gateway and how to route the ips in and out of the network.

3

The gateway of my computers are the RouterBOARD.
How I config the route? I try alot of settings, but no one works.

I think in the same way of you eric, but I can’t find the correctly settings.
Thanks for reply :slight_smile:

4

Please read this article:
http://wiki.mikrotik.com/wiki/Hairpin_NAT

5

Thank you very much!
Thats exactly what I’m looking for. :smiley:

Mods can close the topic.