Has anyone tried using this device ?
I have sent an installer this morning to try and install this cpe to a GrooveA-52HPn.
At first when trying to connect it, the second he click apply on the cpe the mikrotik goes to 100% cpu and crashes completely and only a reboot fixes it.
I have disabled wds on the mikrotik and now the cpe connects fine. Tp-link has made some attempt to steal design of Ubnt firmware, they have also implemented some tdma protocol.
The AP is configured as 2ghz b/g/n with 20/40Mhz channel width on 802.11 protocol as there are all kind of cpe devices. When this cpe connets in log it says it wants bridge :
Jun 23 12:14:08 192.168.10.47 wireless,info C4:E9:84:33:4F:51@wlan1: connected, wants bridge
All other cpe just say connected, as they are working in station mode. The bridge setting is disabled on the ap, but I also tried to enable it. The cpe just stay connected, i can see tx rate, but no rx rate and no traffic passes at all.
On the cpe I have tried setting it as client or ap client router(wisp client).