Hi,
nearly every computer in my network ist connected with two network segments. When I start the first device discovery, everything is fine. When I start a second discovery (or the automatic dicsovery starts) the devices get new connections:
Why does that happens? What does it mean??
ciao
JM
What are you saying and what are the netmasks of the subnets…it looks like you have tow subnets like 10.0.5.1 and 10.0.5.2 and dude is discovering both subnets because it’s set to search the whole subnet range of 10.0.5.0/24 which will discover any netmask from 0 to 254. Is this what you are asking…I’m not quite sure. Don’t search a range search the subnet by netmask ie 10.0.5.1 or 10.0.5.2 and you won’t get duplicates…lol if that is what you are saying 
Hi,
maybe there is a misunderstanding. They are only connected to two subnets in the Dude. I only have one subnet, 10.0.5.0/24. So every Computer should only be connected to one subnet. But, as you can see at the screenshot, the computers are connected to two subnets - and both of them are 10.0.5.0/24. In my eyes that makes no sense.