connecting 2 or more mikrotik

RouterOS Wireless Networking
1

I am new here so i will make a good beginning :slight_smile:

So I built a small network as follows:

router → mikrotik routerboard 750 → ubiquity nanostation

after i made the necessary configuration for for free hotspot access I want to expand it. There is one that having internet via ubiquity (a), then I want to make him node. Via one more ubiquity (b) i want to send the signal that receives. The cable of (a) ends in a switch and then to give (b). The problem is:

case 1
User 1: receive via the ubiquity (a), after entering the hotspot etc. and has internet
User 2: receive via the ubiquity (b), the page comes out of the hotspot but can not get into the hotspot to having net.

case 2
User 1: receive via the ubiquity (a), after entering the hotspot etc has Internet → logout from hotspot
User 2: receive via the ubiquity (b) comes out the page of the hotspot and can enter the hostpot, so has internet
User 1: can not rejoin the hotspot

thus stored in the mikrotik mac’s ubiquity (a) and thus can not be second or more to have access. This is how it can be overcome; By adding second mikrotik and after configured properly will be able to create the second node there;

2

Are you using the local (/ip hotspot user) database for authentication? Are you using one user/password for the users?
If so, you will need to increase this value

/ip hotspot user profile
set X shared-users=32

If 32 users logged in simultaneously is not enough, set your own limit there.

3

thank you for your answer.

Well, when users try to connect from ubiquiti (a) can be on internet 200+ free users, plus X number of users that have user and pass. I don’t have any problem from the first one.

The problem is from 2nd ubiquiti and after. Do you see the connection that i have made correctly? attached
i have to put an additional mikrotik before (c)?

something else. The consept that i want to create is something like the “mesh”?


mikrotik-ubiquiti.png