Hi guys,
I am trying to connect my USB modem to the RB411U, but as for now with no success.
The modem is listed in the system
[admin@TEST_1] > /system resource print
uptime: 22m8s
version: 5.14
free-memory: 18300KiB
total-memory: 29708KiB
cpu: MIPS 24Kc V7.4
cpu-count: 1
cpu-frequency: 300MHz
cpu-load: 5%
free-hdd-space: 30920KiB
total-hdd-space: 61440KiB
write-sect-since-reboot: 355
write-sect-total: 95321
bad-blocks: 0.2%
architecture-name: mipsbe
board-name: RB411U
platform: MikroTik
[admin@TEST_1] > /system resource print usb
expected end of command (line 1 column 24)
[admin@TEST_1] > /system resource usb print
# DEVICE VENDOR NAME SPEED
0 2:1 RB400 EHCI 480 Mbps
1 2:2 HUAWEI Technology HUAWEI Mobile 480 Mbps
2 1:1 RB400 OHCI 12 Mbps
[admin@TEST_1] >
but I do not receive standard modem reply nor on channel=0 nor =1
I know that E156G could be run on 411U as Pilgrim did it here - http://forum.mikrotik.com/t/rb411u-strange-connection-rout-problem-solved/30958/1
I will appreciate any help.
Maybe Pilgrim, as you used E156G on your RB.
EDIT:
It is a double thread. Moderator close this one, please. Leave the linked one open: http://forum.mikrotik.com/viewtopic.php?f=13&t=60614&e=0