Connecting ether2 on 133c board and ether2 0n 532 board

RouterOS Wireless Networking
1

i want to connect two boards together on a tower by using their ether2 ports and a straight cable.
it is connected alright and i can see both in the neigbours and i can ping the mac adresses but can not reach them by the ip addresses

please help

2

Check the IP address configuration and ip route configuration.
There should not be nothing wrong on the RouterBOARDs.

3

should the ip be in the same block with the same subnet mask?

like if board a has 10.10.10.1 255.255.255.0 and board b 10.10.10.2 255.255.255.0 OR a have 10.10.10.1 255.255.255.0 and b 10.0.1.2 255.255.255.0?

then in the route i have problem making traffic pass through each other. it becomes very slow

4

When the boards are on the same Ethernet network, use the same subnet for them.