cpu clock

RouterOS Beginner Basics
1

Hi to all!

i’ve some problem with a RB532A. I set my cpu frequency at 399Mhz with Termnial → interface → routerboards → settings → set → cpu-frequency=399Mhz
and after that, keep-frequency
when i check with system resource it immediatly goes on 399 Mhz, but after few seconds or reboot it returns at 266Mhz (cpu mode works in safety mode)
how can I lock at 399Mhz??

thx :sunglasses:

2
  1. set frequency
  2. power off router (unplug power)
  3. power on router
  4. save frequency
3

it doesn’t work.

when I set frequency, if I wait or turn off/restart routerboard it automatically goes back on 266mhz.

so strange…

4

do it just like i described above. don’t wait for anything, and use hard reset (power off)

5

Can these same steps be done remotely by ‘rebooting’ instead of ‘powering off’?

6

no, power off is essential