Hello everyone! There is hAP ac² - a great device for the money. At the moment, on default settings, it passes about 400 Mbit (nat, firewall, simple queues). The question is about overclocking the processor. What parameters are permissible without losing the reliability of the device. Share your experience who uses processor overclocking. Sincerely.
The best scenario would be if you do not touch here.
Just leave it as it is by default
There is really no danger here, as long as it’s stable. You can open the hAP and check CPU temperature to see if it’s not getting too hot, but as long as it stays below about 60 degrees it will be OK.