Create BGP Peer within VRF

[ohitz]

@tomranson

For our use case we’re actually just defining a simple catch-all Route Rule of “0.0.0.0/0 lookup table:backbone” as this of course also takes care of issues with some other non-VRF aware management/control plane protocols. You could just specify /32 rules for the BGP peer IPs though if that is all that’s required.
…
Hope this helps someone else someday!

Thanks Tom, this has helped me a lot! I ran into the same issue with iBGP sessions not being established on version 6.40.4.

The “IP Route Rule” solves the problem.

Regards

Oliver