create hotspot from VAP

RouterOS Beginner Basics
1

Hello
I’m using RB433
Ether3 is 10.0.0.101 and connected to 10.0.0.254(my modem that connect to the internet)
I have a rule in the route

B - blackhole, U - unreachable, P - prohibit 
 #      DST-ADDRESS        PREF-SRC        GATEWAY            DISTANCE
 0 A S  ;;; IP of the modem 
        0.0.0.0/0                          10.0.0.254                1

I’m trying to create hotspot while using VAP
I can see I’m connecting to the network and getting IP - but I don’t get the login page
I have reset the html of the hotspot - but still I get nothing
why is that ?
this is the config of the VAP

Flags: X - disabled, R - running 
 2  R name="Vap-30_Hotspot" mtu=1500 mac-address=02:15:6D:63:58:5A arp=enabled 
      interface-type=virtual-AP master-interface=wlan2-2.4Ghz ssid="hotspot" wds-mode=disabled 
      wds-default-bridge=none wds-ignore-ssid=no bridge-mode=enabled default-authentication=yes 
      default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no 
      security-profile=default
2

You’ll need to post the reset of your settings so we can see what is going on there.

3

Be sure you allow remote requests in the dns settings.

Sent from my C5170 using Tapatalk

4

I think my problem is else where ,and not the hotspot config
something that connected with firewall and Vlan\Vap

I will post a new post with this

Thanks ,