Hello to every one,
I’m a beginner in networking,
I’m asking for help to creating VLANS and accessing to internet.
My router has two modes: as Router and as Switch.
I’m connecting to the device from WINBOX.
I’m choosing ROUTER mode, selecting WAN port, so everything works fine - from device terminal ping goes fine to google DNS servers.
WAN cable coming from 4G modem, where selected Bridge mode, so I’m straight to WAN, no filters or firewalls behind.
I’m founded on a youtube tutorial on how to create several VLANS, so I’m created, they are separate to each other, ping to VLANS gateway working just fine, BUT I have no internet.
So spend a few days experimenting: Routes, Firewalls and etc. - no effect.. 
There are steps, that I made to create VLANs
- Bridge > Bridge > Add (+)
1step
Bridge name: BridgeVLAN100
OK
-
Bridge > Ports
Creating Port and selecting Bridge profile -
Interfaces > VLAN
Create new / General
Name ): vlan100
VLAN ID : 100
Interface ): bridgeVLAN100
OK
- IP > Addresses
Create new
Addresses: 192.168.100.1/24
Network: 192.168.100.0
Interface: išsirenkam BridgeVLAN100
OK
- IP > DHCP Server > DHCP > DHCP Setup
DHCP Server interface: BridgeVLAN100 >Next
DHCP Address Space: 192.168.100.0/24
Gateway for DHCP Network: 192.168.100.1
Addresses to give out: 192.168.100.2-192.168.100.254
DNS Servers: 8.8.8.8
8.8.4.4
Lease time - leaving as default - 10 mins.
So then starting pinging to 192.168.100.1,
but 8.8.8.8 is unreachable.
I think I made mistake on Routing tables or Firewall…
Pls HELP