Hello,
We already have several CRS 125 and now we test the switch CRS 326.
In the webfig we have two headings named “switch”. One with all ports but few options and the other with the usual options but with no ports.
In the console “/interface ethernet switch” console, we have few options. We do not see, for example, ACLs.
If we boot swOS and upgrade to 2.4 boot fail with all ports binking.
Now we can boot ver 2.4 of SwOS with the new 6.4 version of Router packages (Firmware 3.40).
No. When we plug SFP+ port all port blink in SwOS.
Ping to our switch:
PING 10.2.0.88 (10.2.0.88) 56(84) bytes of data.
64 bytes from 10.2.0.88: icmp_seq=8 ttl=255 time=0.174 ms
64 bytes from 10.2.0.88: icmp_seq=9 ttl=255 time=0.200 ms
64 bytes from 10.2.0.88: icmp_seq=19 ttl=255 time=0.187 ms
64 bytes from 10.2.0.88: icmp_seq=38 ttl=255 time=0.196 ms
64 bytes from 10.2.0.88: icmp_seq=76 ttl=255 time=0.330 ms
64 bytes from 10.2.0.88: icmp_seq=87 ttl=255 time=0.191 ms
64 bytes from 10.2.0.88: icmp_seq=98 ttl=255 time=0.173 ms