I need some help with the VLAN configuration on the CRS109 please:
I have an existing managed D-Link Switch where:
Port 1 = 802.1Q VLAN1 + VLAN2 = Trunk
Port 2-5 = 802.1Q VLAN1 = LAN
Port 6-10 = 802.1Q VLAN2 = WAN
The CRS109 should be configured like that:
Port 1 = 802.1Q VLAN1 + VLAN2 = Trunk
Port 2-6 = 802.1Q VLAN1 = LAN
Port 7-8 = 802.1Q VLAN2 = WAN
It should have IP 123.123.123.123 in VLAN2 WAN and 192.168.1.1 in VLAN1 LAN and should do NAT/Masquerade so devices connected to the VLAN1 LAN Ports have Internet Access.
Can someone point me into the right direction how I have to configure the VLANs of CRS109?
I need wire speed switching from D-Link VLAN 1 LAN to CRS109 VLAN1 LAN.