Hi community,
after resolved having an x86 RouterOS router (http://forum.mikrotik.com/t/uefi-only-routeros-install-not-working-non-chr/159532/1) still have a problem with my CRS309 (SwOS 2.13) switch.
As you can see in profile signature all other switches and X86 router are showing up in WinBox (driven by Crossover on Mac M1) but not CRS309. Can reach all switches including CRS309 over IP. Router can see CRS309 over nighbours too in same VLAN1.
All switches in same VLAN1 with static IP (no doubles !).
Mac is at VLAN10. Firewall forward route from VLAN10 to VLAN1 (full /24 for testing) is set.
chain: forward src-adr: 192.168.160.10.0/24 dest-adr: 192.168.1.0/24 in-interface: vlan10 out-interface: bridge1 action: accept
Tried to resolve issue by resetting to factory default crs309, tried other switch ports, etc without success.
Using RouterOS at CRS309 is not an solution in this case.
Hope somebody can help
Regards
yavin
