CRS317-1G-16S+ Fail

RouterOS General
1

Hello,

I’m having serious problems, I upgraded 4 CRS317-1G-16S + to RouterOS version 6.41.4 and they stopped working. Updating the console returned this information:

loading kernel… OK
setting up elf image… OK
jumping to kernel code
Starting…
failed to open /dev/flash: No such file or directory
open /dev/panics failed
could not load module logring.ko: Bad address
cat: Read error: Input/output error
cat: Read error: Input/output error
cat: Read error: Input/output error
cat: Read error: Input/output error
cat: Read error: Input/output error
cat: Read error: Input/output error
/etc/rc.d/rc.start: 21: /pckg/security/etc/rc.d/run.d/S09sshd: Input/output error
System halted.


What can I do :frowning:

Regards,
Vagner Felipe Becker

2

I still do not know what’s going on. I went back to the previous version 6.40.5 and look what happens

loading kernel… OK
setting up elf image… OK
jumping to kernel code
System halted.
BUG: soft lockup - CPU#0 stuck for 23s! [init:38]
Kernel panic - not syncing: softlockup: hung tasks
{bf145ce4} panic+0x84/0x1c0
{bf145d1c} watchdog_timer_fn+0x150/0x1a0
{bf145d64} __run_hrtimer.isra.26+0x5c/0xf8
{bf145d7c} hrtimer_interrupt+0x10c/0x254
{bf145ddc} msys_localtimer_handler+0x20/0x28
{bf145de4} handle_percpu_devid_irq+0x80/0xa0
{bf145dfc} generic_handle_irq+0x20/0x30
{bf145e04} handle_IRQ+0x7c/0xb0
{bf145e1c} armada_370_xp_handle_irq+0x38/0xa4
{bf145e3c} __irq_svc+0x40/0x60
Exception stack(0xbf145e40 to 0xbf145e88)
5e40: 00000001 00000001 00000001 00000001 cdef0123 80412714 00000000 fee1dead
5e60: 8000d928 bf144000 00000000 00042f30 00000002 bf145e88 80012914 8000e9d8
5e80: 60000013 ffffffff
{bf145e84} machine_halt+0x8/0xc
{bf145e8c} sys_reboot+0xf4/0x1b4
{bf145fa4} ret_fast_syscall+0x0/0x30
Rebooting in 1 seconds..

Is it time to abandon mikrotik?

3

Netinstall the version you desire.

http://forum.mikrotik.com/t/crs-netinstall-stuck-on-junmping-to-kernel-code/116467/1