CRS320-8P-8B-4S+ Second PSU not working

Hardware MikroTik hardware general
1

I have a CRS320-8P-8B-4S+ and ordered a second Gospower G1483-0600WNB
More for redundancy than Power Requirements really.

However the PSU starts up the right led is solid green and the left one keeps blinking green, as if it were not connected.
The log shows:

  • PSU2 power input not detected

  • PSU2 entered state FAIL

I can measure only 12V on the PSU but i guess the 54V would only be available once it gets a startup signal from the switch

2

Check the log, maybe there is something there, it could be a software issue, see:

Try exchanging the PSU's, and see what happens.