Hello. I Have CRS326-24G-2S+
Current firmware: 6.44beta17, also i trying 6.43 and .42.9
I want to use LACP with my NAS server.
I created bond interface with 802.3ad mode and added to him ether 23 and ether 24, after i add this interface in my lan bridge, i can not seen option HW offloading.
- /interface bonding print
Flags: X - disabled, R - running
0 ;;; 23-24 LACP
name=“bonding1” mtu=1500 mac-address=B8:69:F4:17:DC:2C arp=enabled
arp-timeout=auto slaves=ether23,ether24 mode=802.3ad primary=none
link-monitoring=mii arp-interval=100ms arp-ip-targets=“”
mii-interval=100ms down-delay=0ms up-delay=0ms lacp-rate=30secs
transmit-hash-policy=layer-2 min-links=0
If i use this command in terminal:
- add bridge=bridge1 interface=bonding1 hw=yes
my bond also dont use HW:
- 20 I H ether21 bridge1 yes 5 0x 10 10 none
21 I H ether22 bridge1 yes 5 0x 10 10 none
22 I bonding1 bridge1 yes 1 0x 10 10 none
I used this guide for configured:
https://wiki.mikrotik.com/wiki/Manual:CRS3xx_series_switches#Bonding