I would like to see what i am doing wrong, i have a CRS328-24P-4S+ that supports 802.3at, I connected ruckus AP that requires 802.3at however is only coming up in 802.3af mode. after some troubleshooting i found this error.
LLDP TLV 25.0W request denied : hw-limit
PoE is auto-on
PoE Voltage is auto
PoE priority is 1
and PoE LLDP is enabled.
Any idea? 25W is within the limits of the HW so there shouldnt be any problem.
Pat