CRS354-48P-4S+2Q+ ethernet interface issue

SwOS
1

Hello,

I have a CRS354-48P-4S+2Q+ and it works quite well.
But sometimes some ethernet interfaces stop to working.
A reboot of the CRS354 solve the problem but I think there’s a real issue.
Firmware; 6.48.1 ( qca9531L ).
Only the reboot works.
Disable/enable interface don’t.
The link is UP but the devices connected to this port are not working and I have no data passing.
Any idea or advice to retrieve more useful informations about the issue?

BR.
Felix.

2

Hi

please try to update to a latest version 6.48.3 and see if that will fix your issue, i believe there was a similar situation like yours and the fix was on 6.48.2 at least

3

Also try to reboot device at the other side… please

4

Hi,

About this problem, see this thread: http://forum.mikrotik.com/t/crs354-48p-4s-2q-traffic-problem-on-ports-1-to-8/139024/1