# CRS804 - Can a single QSFP-DD port support 2×100GBASE-CR4 breakout to two ConnectX-5 NICs

**URL:** <https://forum.mikrotik.com/t/crs804-can-a-single-qsfp-dd-port-support-2x100gbase-cr4-breakout-to-two-connectx-5-nics/274361>\
**Category:** MikroTik hardware general\
**Created:** [November 8, 2026, 7:44am UTC](https://forum.mikrotik.com/t/crs804-can-a-single-qsfp-dd-port-support-2x100gbase-cr4-breakout-to-two-connectx-5-nics/274361 "2026-11-08T07:44:18Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Enigmatic](https://forum.mikrotik.com/letter_avatar/enigmatic/32/6_449c533f586939b6e5f246632a46421f.png) [@Enigmatic](https://forum.mikrotik.com/u/Enigmatic)\
**Post date:** [November 8, 2026, 7:44am UTC](https://forum.mikrotik.com/t/crs804-can-a-single-qsfp-dd-port-support-2x100gbase-cr4-breakout-to-two-connectx-5-nics/274361/1 "2026-11-08T07:44:18Z")

</div>

I’m considering getting a CRS804-4DDQ-hRM for my home server cluster and have a quick question about breakout compatibility.

I have two servers, each with a Mellanox ConnectX-5 (MCX516A-CDAT) 100GbE NIC.

I’d like to connect both to a single QSFP-DD port on the CRS804 using a passive QSFP-DD to 2×QSFP28 breakout DAC.

From what I understand, this would use 8×25G lanes on the switch side, split into two 4×25G (100GBASE-CR4) connections.

The documentation mentions 8×25G breakout and 4×100GBASE-CR2, but I couldn’t find confirmation that **2×100GBASE-CR4** is supported.

Has anyone tried this, or knows if it would work? Would both connections show up independently in RouterOS?

Would love to keep my existing NICs and save a switch port if possible.

Thanks! 🙂
