CSS610-8G-2S+IN SFP+ Management acces problem from trunk SFP1+

SwOS
1

Hi all,

I did the conf like that:

SFP1+ Trunk (VLAN69)
Eth1 Trunk (VLAN69)
Eth8 Acces (VLAN69)

When the CSS is connected by the port eth1 to another swith (trunk) everything works fine. I can acces to management from the acces port eth8 and from outside by the trunk port.. When the CSS is connected using the SFP1+ i can not acces to the management of the switch from outside. In both scenarios from the port eth8 i can acces to the rest of the vlan69.

I have even tried to use a SFP to copper in the SFP+ to connect direct with my computer using the VLAN tag 69 in my network card without results. Aswell i had try to connect using the SFP to copper in the same port od the main switch what was working using the eth1 of the CSS. Any sugestion?

2

Next time you create a new thread, please check if somebody has already posted something similar. The SwOS topic is currently full of CSS610 problems:

http://forum.mikrotik.com/t/css610-8g-2s-in-no-firmware-to-download/144036/1
http://forum.mikrotik.com/t/css610-8g-2s-in-vlan-behaviour/144150/1
http://forum.mikrotik.com/t/css610-8g-2s-in-swos-2-12rc2-upgrade-missing/143435/1
http://forum.mikrotik.com/t/css610-8g-2s-in-ip-change-problem/144365/1

etc - they are multiplying like bunnies.

3

another one

http://forum.mikrotik.com/t/css610-8g-2s-management-access-from-sfp-port/144001/1