CubeSA 60Pro ac: 60Ghz clients flapping

kabrutus · August 26, 2022, 3:23am

We have a new setup of about 15 CubeSA 60Pro AC access points with Cube 60Pro AC client radios and since we installed them, we’re getting frequent drops on all 60Ghz clients. We have a simple setup with bonding (for 5Ghz failover) and can’t see why this is happening. Any suggestions on where to look? Both AP and CPE are running 7.4.1.

I’ve tried turning on wireless / info or debug in the logs and aren’t getting anything. The client signal strenghts are in the 80’s and 90’s with an MCS of 8.

AP 60ghz config:
/interface w60g set [ find ] disabled=no frequency=66960 isolate-stations=no name=AP-60Ghz put-stations-in-bridge=bridge region=usa ssid=myap
/interface bonding add mode=active-backup name=bond1 primary=AP-60Ghz slaves=AP-60Ghz,AP-5Ghz
Client 60ghz config:
/interface w60g set [ find ] disabled=no mode=station-bridge name=wlan60 put-stations-in-bridge=bridge region=usa scan-list=58320,60480,62640,64800,66000,66960 ssid=myap
/interface bonding add mode=active-backup name=bond1 primary=wlan60 slaves=wlan60,wlan1
I mean, it’s all pretty vanilla.

20220820 12_45_09.png

20220820 12_44_25.png

Same exact setup and hardware. Same issue