Hello Guys
I have RB1100 AHx2 also I am running hotspot on bridge … I added 4 ethernet ports to this bridge … Each port is connected to Main antenna ( Nano Station ) this antenna is transmit internet to other stations
now for example as the last diagram i cannot access Station 3 when i am connected to station 1 … but i can access station 2
so I can access stations that are connected to the same antenna
anybody can help me … can we add some command or firewall to solve that …
many thanks
This may help:
Since Nanostations speak only STP, set your bridge to use STP instead of the default RSTP on your RB1100.
And be sure to have arp enabled or set to proxy-arp on your bridge.
And do you have all stations in the same subnet?
Hi, maybe try to set one port to master and other three to slaves and as hotspot interface use master port, i have the same problem and now is solved.
This may help:
Since Nanostations speak only STP, set your bridge to use STP instead of the default RSTP on your RB1100.
And be sure to have arp enabled or set to proxy-arp on your bridge.And do you have all stations in the same subnet?
Thanks Dear … I tried to set my Bridge to use STP and arp is already enabled … also I have Subnet in all sattion
but this didn’t solve the problem
Hi, maybe try to set one port to master and other three to slaves and as hotspot interface use master port, i have the same problem and now is solved.
many Thanks dear … but I have the hotspot running on the Bridge not on one of Ether ports …
although i tried to put this command
/interface ethernet
set ether6,ether7,ether8,ether9,ether10 master-port=ether2
unfortunately this not solve the problem
And try do what i write, but only do masterport2 other slaves and in bridge leave only ether2, hotspot leave on bridge interface. When not work, try add IP addreses of APs to IP BINDING rules and set baypass.
Great … Solved … many Thanks dear