DFS mode with radar detect

In DFS mode with “radar detect”, how much time it takes to rescan again to know if the frequency is free, or once it scans and find a free channel it remains forever in that frequency even if the frequency has became used by a radar.

RouterOS 4.2 and Regulatory Domain for Portugal using 5 GHz Outdoor frequencies [5500-5700 MHz].

Regarding EN 301 893 , a full linkdown and rescan after 24 h is not required anymore. theoretically the link should be up until radar is detected. (detected while the link is up)

But I do not know how Mikrotik has implemented European Regulation. Maybe they still use an older version oft DFS that required a link down after at least 24 hours and a new radar detection in passive mode.

Also consider, that TPC requirement is not supported by mikrotik.
Therefore the max. Tx Power in EU is limited to 27 db (=500 mW).
With TPC support, 30 db are allowed (equals 1000 mW).