DHCP-Server And Bridge problem.

RouterOS Beginner Basics
1

Hi
I have two network and a wireless link between them.
In each network I have a ADSL modem that its network use it for connect to internet.
Wireless link between two network was made with two SXT 5HnD .
One SXT wlan mode is in bridge mode and other is station-bridge.
I want run DHCP Server on these networks. But I don’t know how to config SXT
If DHCP server run on this mikrotiks , and bridge for ether1 and wlan1 enable, DHCP Server will be invalid.
Please tell me how config SXT’s that:
DHCP Server Enable.
Each network use its ADSL modem.

DHCP-Server And Bridge problem.
2

Not 100% sure of your question but note that:

  1. If a bridge is present run the DHCP server on the bridge not the member ports.
  2. Make sure a relevant IP address is assigned to the interface otherwise the DHCP server will show as “invalid”.
3

hello i have the same problem.and couldnt solve my problem yet.both modems runnings their own dhcp servers.with same subnet 192.168.1.2 (+100 pool) and 192.168.1.1(+100 pool).on stxs bridge side dhcp is off.setup is bridge and bridge station.

problem starts when a device or pc from location B takes ip from location A adsl modem.i dont want adsl modem dhcp (a location) pass the stx and give ip to B location devices.