DHCP / Weird range given?

RouterOS Beginner Basics
1

I have a weird situation with 3011: I just made a DHCP and a network:

Addr: 10.10.10.0
Gate: 10.10.10.1
Netmask: 24
etc

However, my client machine receives 10.10.10.n / subnet: 255.0.0.0?

Shouldn’t netmask 24 make max 255 clients? This is on 6.47.9

I just checked on one other installation (4011) with the same subnet, and the clients are given 255.255.255.0 correctly.

EDIT:

reported 255.0.0.0 is on my mac, and one test XP VM (with AirView) I just spun up reports subnet of 255.255.255.255

…

-_-

2

export, not novels

and the address on network must be 10.10.10.0/24

3

It was set to 10.10.10.0/24 Pretty standard configuration. Can't export, because I reconfigured to standard 192.168.242./24 and it works now on all clients. Go figure.

(I also update boxes to latest LT ROS.)

This is the first time I had these issues. - I literally have 3011 on my table, one CAP connected to PoE port and my laptop to some random bridged port. No internet, FW currently, etc.

I literally don't have any clue what occurred.

As for testing again at 10.10.10.0/24 - I can do that if you deem it will be useful to someone?