Didnt had any luck - any other ideas

RouterOS Wireless Networking
1

(my apologies - this refer to posting
Setup MT with Senao SL3054CB3 Cannot communicate in WDS mode. The early mornings is taking is toll)

I didnt succeed.
Altough i can ping them from inside the wds interface. Icant get access from other interfaces.

  1. I have tried diffrent scenarios, even taken the example of http://wiki.mikrotik.com/wiki/Transparently_Bridge_two_Networks.

The latest is the following.

I upgrade the MT from 2.8.27 - 2.9.31.

step 1)winbox. Added in terminal the setup cmd. Run Setup ether1 (192.168.2.2/24) and gateway (192.168.2.1)
add dns servers
test ping form terminal and outside

step 2) Create a bridge = wdsbridge
wlan1 + ether2 = bridge2 STP enable
Wlan ap-bridge, wds - dynamic, bridge= wdsbridge
Give it a ip adress 192.168.3.1/24

Then wds1 appear with MAC address of senao AP.
the i add NAt Firewall rule
srcnat >srcaddress=192.168.3.0/24 Action=masqurade

Any help or solutions. Their must be something i am not doing.