Hi,
I studied the page at http://forum.mikrotik.com/t/using-routeros-to-vlan-your-network/126489/1 and focused on Router-Switch-AP (all in one) section which applies to me. As I need only Guest access only on Wifi, I dropped the changes related to the physical ports.
My Mikrotik has both 2.4 and 5GHz antennas. Do the lines below mean that each antenna will be dedicated to a different VLAN?
# Blue SSID
/interface wireless security-profiles set [ find default=yes ] authentication-types=wpa2-psk mode=dynamic-keys wpa2-pre-shared-key="password"
[b]/interface wireless set [ find default-name=wlan1 ] ssid=BLUE frequency=auto mode=ap-bridge disabled=no[/b]
# Green SSID
/interface wireless security-profiles add name=guest authentication-types=wpa2-psk mode=dynamic-keys wpa2-pre-shared-key="password"
[b]/interface wireless add name=wlan2 ssid=GREEN master-interface=wlan1 security-profile=guest disabled=no[/b]
I’ve enabled the openvpn service and would like access using this service to be on VLAN 10. Where would I specify this setting please?
My final question is related to an AP I have. It supports VLANS (Cisco Autonomous mode). On this device if I set the corresponding VLANS I would expect the Mikrotik to issue the DHCP addresses based on the VLAN reference (10 and 20 for BLUE and GREEN).?
Thanks for all the help