Divide users on 2 WAN from same LAN

RouterOS Beginner Basics
1

Hi,
i have 2 WAN and 1 LAN on mikrotik x86
WAN1 ip is: 192.168.0.2 - and gateway is: 192.168.0.1
WAN2 ip is: 192.168.2.2 - and gateway is: 192.168.1.1
and LAN ip: is 192.168.88.0/24

and nat rule in firewall is:
/ip firewall nat
add action=masquerade chain=srcnat

now i want a user with an ip 192.168.88.100 and 192.168.88.184 should use WAN1 and the rest of the users should use WAN2, i don’t want loadbalancing. Please help me.

2

Hello.

  1. In mangle mark outgoing traffic from these users with some routing mark
  2. In routes set bigger distance in existing “0.0.0.0/0” routes
  3. add route with routing mark from 1. to wan1
3

Hi, try this:

/ip firewall addresss-list
add list=WAN1 address=192.168.88.100
add list=WAN1 address=192.168.88.184
add list=WAN2 address=192.168.88.2-192.168.88.99
add list=WAN2 address=192.168.88.101-192.168.88.183
add list=WAN2 address=192.168.88.185-192.168.88.254




/ip firewall mangle
add chain=prerouting src-address-list=WAN1 action=mark-routing new-routing-mark=to_wan1
add chain=prerouting src-address-list=WAN2 action=mark-routing new-routing-mark=to_wan2

At this point, remove any default route and then:

/ip route
add dst-address=0.0.0.0/0 distance=1 gateway=192.168.0.1 routing-mark=to_wan1
add dst-address=0.0.0.0/0 distance=2 gateway=192.168.1.1 routing-mark=to_wan2

I hope this helps you.

Regards.

4

yes it works, thanks.

djfrancis 5

:smiley: :smiley: