Do NOT route it in RIP

RouterOS General
1

I could be good to have an subnet (eg. behind NAT) which is not routed via RIP.
For example a list of not routed subnets or a checkbox ‘Do not route’ at IP.

Reason: I’ve got a subnet 192.168.1.0/24 which is behind NAT and when I use RIP, i’ve got it routed on all routers and it’s NOT needed.

Thx

2

Using the regular routing package, lookup routing prefix-list in the manual.

With the routing-test package, look at the “bgp” routing filters, just use the rip-in and rip-out chains.

–Eric