DoH memory bug.

[rextended]

Please do not quote the whole post directly above you. There is a “Post Reply” button to use below the post.

I understand this,

Read ROS Values with an ESP8266

Hi, i wanted to display some RouterOS values on a LCD hooked up to an ESP8266 which is connected to a Mikrotik Wifi network. Background Story: We have a small train that should get Wifi over LTE along the track for our customers and to send the GPS Position of the train to a server. For this i want to get a Mikrotik router since i am familiar with these. To check the LTE, GPS and Internet Status I want to place an ESP8266 with a LCD/OLED Display at the driver’s cab so that he knows whats goin…

but do not blame me…

see this two examples:

VRF and DHCP?

Not sure if this is a beta bug or i’m doing something very wrong, I suspect a bug because winbox crashes. Essentially if I create a VRF on a 4011 running 7.1b5 and try to use the DHCP client on the interface winbox will crash the moment I goto ip > routes. If I look at the routing table via the CLI it looks like the route added by DHCP ends up in the main table. Also I couldn’t seem to pass traffic within the VRF.

Selection for 2.4 Ghz device on longer distance

Hello Hope you are all fine. I want to setup 2.4Ghz WiFi wireless network for mobile phone users in 500 meter distance 360 degree omni. I’m confused about selecting 2.4Ghz models. I mentioned below: Grove A 52 Grove A 52 ac Metal 52 ac mANTbox 2 12s Tell me which device is best for full fill user needs. In 360 degree omni in 500 meter distance People who have experienced with 2.4Ghz and currently running wifi network on 2.4ghz encourage to post comments and SHARE their experience Than…