/Henrik
why?
It never came up again and i am 1½ hours away from it and 300 WISP customers 
/Henrik
yes there is a reboot bug on some 5xx boards, I experienced it on 511.
It needs a power cycle.
Regards
no there isn’t. you are the only one who experienced it.
beta 7 is recommended, it fixes so many bugs from beta 6 and it works very stable. we have it all around our network for a while now.
Normis,
Yesterday i reinstalled our Firewall.. I discovered that the crash i had was a total freeze of the PC.. I had the admin login on the console and then it froze up completely with the old configuration.. I did a totally new install with netinstall and made a simple config with 3 interfaces, 1 wan one dmz and one natted connection.. It worked like a charm until i enabled packet-flow.. Then it froze up again. Had to drive 1½ hour (again), reboot firewall and disable packet-flow. Now it has been stable for like 24 hours, but i’m not going to make any further configuration until i am closer to it 
/Henrik
Above statement isn’t exactly true.. After discovering how fast this was on the wireless side i decided to put some simple firewall rules on my fw and suddently.. Boom.. New crash, but it came up after 2-3 minutes !? again but manage to make a supout. Have sent this to support@…
/Henrik
Run a memtest and make sure all of your RAM is good.
Memory is fine.. Back on 2.9… It’s stable.. Maybe some shipset issue, we will see what MT comes up with..
/Henrik
6 runs ok using pseudobridging. 7 seems to go away and can no longer log in. Also seems to reboot frequently. Have to do a hard reset to defaults to get back in touch with it then need to immediately set it back to 6 to use. Feels like a memory leak…
/robert
For me, M/T ROS v3.0 b7 is very stable, we’re using M/T RouterBOARD 532 as well as WRAP. Highly recommended for testing. Also, IGP such OSPF do the best.
There are only minor (? bugs) as follows:
-console has crashed if doing: /export file xxx
-dfs not working