Dual power supply status

Hardware MikroTik hardware general
1

How does one check the status of the dual power supply on Routerboards such as the CCR1009-8G-1S-1S+? I don’t see anything under the “System” “Health”/ Is something available via SNMP?

2

Answered my own questions

  1. You don’t seem to see the power supply status using Winbox

  2. Command line works

/system health print
fan-mode: auto
use-fan: main
active-fan: main
cpu-overtemp-check: yes
cpu-overtemp-threshold: 100C
cpu-overtemp-startup-delay: 1m
voltage: 24V
current: 758mA
temperature: 35C
cpu-temperature: 53C
power-consumption: 18.1W
psu1-state: ok
psu2-state: ok
fan1-speed: 4718RPM


And lastly, there is an OID for each power supply in the MIB.

3

[admin@demo.mt.lv] > /system health print oid
active-fan: .1.3.6.1.4.1.14988.1.1.3.9.0
voltage: .1.3.6.1.4.1.14988.1.1.3.8.0
temperature: .1.3.6.1.4.1.14988.1.1.3.10.0
processor-temperature: .1.3.6.1.4.1.14988.1.1.3.11.0
current: .1.3.6.1.4.1.14988.1.1.3.13.0
power-consumption: .1.3.6.1.4.1.14988.1.1.3.12.0
psu1-state: .1.3.6.1.4.1.14988.1.1.3.15.0
psu2-state: .1.3.6.1.4.1.14988.1.1.3.16.0
[admin@demo.mt.lv] >

4

this is unfortunately not longer availible… on 6.4x>

[admin@rooterboard] > system health print oid
            voltage: .1.3.6.1.4.1.14988.1.1.3.8.0
            current: .1.3.6.1.4.1.14988.1.1.3.13.0
        temperature: .1.3.6.1.4.1.14988.1.1.3.10.0
  power-consumption: .1.3.6.1.4.1.14988.1.1.3.12.0
  
[admin@rooterboard] > system health print
            voltage: 23.2V
            current: 441mA
        temperature: 43C
  power-consumption: 10.2W
       psu1-voltage: 23.9V
       psu2-voltage: 24V
5

As of 6.48.6 LTS on Tile it appears it is supported

/system health print oid
temperature: .1.3.6.1.4.1.14988.1.1.3.10.0
cpu-temperature: .1.3.6.1.4.1.14988.1.1.3.11.0
psu1-state: .1.3.6.1.4.1.14988.1.1.3.15.0
psu2-state: .1.3.6.1.4.1.14988.1.1.3.16.0
fan1-speed: .1.3.6.1.4.1.14988.1.1.3.17.0
fan2-speed: .1.3.6.1.4.1.14988.1.1.3.18.0

/system health print
cpu-overtemp-check: yes
cpu-overtemp-threshold: 100C
cpu-overtemp-startup-delay: 1m
temperature: 26C
cpu-temperature: 49C
psu1-state: ok
psu2-state: ok
fan1-speed: 4170RPM
fan2-speed: 3780RPM
6

Hello MikroTik,

There is no psu state information on MikroTik CRS328-24P-4S+.

I have upgraded it to latest RouterOS 6.49.10, and still nothing about psu state.

This is the health information that it is available:

cpu-temperature: 57C
power-consumption: 39.4W
board-temperature1: 34C
psu1-voltage: 26.3V
psu2-voltage: 52.4V
psu1-current: 0A
psu2-current: 0.7A
fan1-speed: 0RPM
fan2-speed: 0RPM

Please tell us when the psu state will be available?

7

Whats wrong with psu1-voltage & psu2-voltage ?

8

The psu state is not available.