I have the following setup on a RB951g
ISP1 static on ethernet1-gateway 192.168.0.0 4M Line(This ISP Blocks all ports except port 80)
ISP2 PPOE on Ethernet5-gateway 2 M line( No blocking of ports)
Lan on Ethernet2 192.168.10.0
I have two questions
- is it possible to establish the connection to The DVR through ISP2 and still utilise both connections to load balance and increase band width?
If not then
2)how would I route all traffic to the DVR through ISP2 and all other traffic through ISP1 without putting the DVR on a different subnet
if you could post some scripts to help explain I would greatly appreciate it.