Hi guys im not much of an expert with routerOS but learning along the way. I had succesfuly configured my network with when i had two 200/20 mbit gpon connections via eltex modem/router, this is mostly the guide i used https://youtu.be/GeuuNE3EPBA
mine networks were a bit different but these were the ip’s my mikrotik router would get via dhcp client.
wan1- 192.168.1.11
wan2- 192.168.10.11
Now they changed eltex modem/router to eltex modem only and now wan ip adresses are
wan1- 10.168.10.95
wan2- 10.168.10.96
I guess from some kind of isp ruter
But now they are on the same subnet and there is no internet at all.
I tried adjusting mangle rules changing dst adresses but like i said i really no expert, if there is more information needed please say
Thanks in advance
I hope those are not your actual public IP addresses if so change them to other numbers!
Post your config.
/export hide-sensitive file=anynameyouwish
Did they provide gateway addresses or any other info, yes or no (dont post actual info provided)
¿¿¿Has any moderator changed the IPs written before???
I dont think so…
But now realize those are private IPs anyway.
I think is another one-time-post-and-go-away user…
So after a lot of going back and forth with my isp i’ve found out that now when they bridged my modems my gateway is 10.168.128.1 in both cases. Its like i have two physical connections to one router. So i guess dual wan config is out of option.
Thank you very much!