Dyna Dish 5 Routerboard Setup

RouterOS Beginner Basics
1

Good day,
I have basic knowledge and need some help. I have setup a few Mikrotik dishes and have a DynaDish 5 which I want to setup as a point to point setup. I have used youtube in the past with success on other dishes. The DynaDish 5 has the new RouterBoard 7.15.1 firmware installed. The Dynadish will be the main Access Point which will be plugged into the main building’s network. So the point I’m strugling with is the following:
On the videos the winbox / Routerboard has a “wireless” interface in the menu on the left and mine show Wifi, which is ok it’s similar. So this is my steps I followed:

  1. Reset with no default settings


  2. Add Bridge


  3. Add Port - ether1


  4. Add Port - wLan – this interface is not available only all, dynamic, ether1, none, static available

Then when I go to WiFi there is no Mode “Bridge” available only (AP, Sation, Station Bridge and station pseudobridge) so on all the yourtube videos there is nothing that can help me where this is missing

See below image
Dynadish 5.jpg

2

You need to install the ‘wireless’ package for the RouterOS version you are running. You can find it inside the ‘Extra packages’ zip file on https://mikrotik.com/download

3

Thank you. This solved the problem