Dynamic i.e. automatically use address list by VLAN on one network with two DHCP servers?

RouterOS General
1

That title probably makes little sense… but here goes

I am trying to get clients that connect to a WLAN with a VLAN tag (from Unifi) to pull from an address pool/list this that is forced to use OpenDNS - while being on the same network with an additional HDCP server for “normal” clients that use Google DNS. For further clarification -

main network - 192.168.1.0/24
HDCP server for normal users from address list 192.168.1.100 - 192.168.1.199
DNS - Use router 8.8.8.8

WLAN 1 - OpenDNS Wi-Fi
VLAN tag 10
HDCP server for OpenDNS users from address list 192.168.1.200 - 192.168.1.225
Create a firewall address list to make users in the above address range to use OpenDNS servers

I want the OpenDNS users to have access to the same network resources Airplay, music, etc… as the other users.

I can make this work by manually assigning (reserving or static) OpenDNS clients to have an IP address in the 200-225 range. BUT - I am trying to figure out a way to do it automatically when connecting to a tagged WLAN? This would be easy :slight_smile:.

Any ideas - thanks in advance!

2

Are you expecting your tagged and untagged clients to end up in the same network [L2 broadcast domain]? If you’ve already separated them by VLAN then surely it makes more sense just to have two different networks rather than trying to bodge it with one network and different DHCP options.

3

I checked around here to Rackking. Do it manually like I told you to. :slight_smile: