Configured email server settings, getting the above when sending a test email.
No Firewall rules to prevent this, and email server is on VLAN connected to my RB750. Other external and internal clients using the mail server normally. Router can ping/traceroute the IP address without an interface specified.
Error is exactly as above - no indication of authentication issues etc although have allowed the LAN IP address of the RB750 as allowed to use mail server as a relay so should bypass authentication process.
Any suggestions? I’d like to get this working for email of log etc.
Does that mean you are trying to send an email from the router? And you added the debug logging to “/system logging” and nothing shows in the router log?
Correct trying to enable ROS email function.
Tried internal mail server and gmail.
With debug level logging all I get is error connecting to server. No further info.
Then the router is unable to connect. That is usually a firewall problem on the server. Check your settings there to insure it allows your localnet to access that port.
Mine is under tools - email, and my email test was in my inbox first try. I am using ROS V6.5 and Linux with Sendmail as the smtp server. And the same router sends me a voltage readout for the last 24 hours every day.
I have in the past tried sending to my gmail account and it works also.
I tried to send through one of my servers that does not accept port 25 email, and I got a message in my log like this. It took a minute or so to show up in the log:
Edit: Thought I had it sorted, but I haven’t.
Getting further than before but still no success. Getting a timeout, but don’t understand why as no internal nor external client has any issue connecting to my mail server.