Just stuck about this:
Lab scenario:
RB1 @ 200.200.1.1/24 on ether1, 200.201.1.1/24 on ether3, PC on 192.168.0.1/24 on ether1
RB2 @ 200.200.1.2/24 on ether1, 200.201.1.2/24 on ether3, PC on 192.168.0.2/24 on ether1
I create bridge, create Eoip, bridge port EoIP, eth1 and eth3. Connect phisically RB1 & RB2 on ether3 both side, all works fine. Everyone ping everyone, include the 1st Pc ping the 2nd PC.
Live scenario:
RB1 @ xxx.yyy.zzz.aaa/28 on ether1, 192.168.0.1/30 on wlan1
RB1 @ xxx.yyy.zzz.aab/28 and 192.168.1.1/24 on ether1, 192.168.0.2/30 on wlan1
Same step as lab (create bridge & eoip), but all goes down. I can’t ping nothing. I wanna make this to carry the /28 of public addresses to RB2 on ether1.
The only issue is that both RB1&RB2 on live link had a old configuration of a bridge and EoIP tunnel that i delete.
ROS is 2.9.30. Where i’m wrong?? Exist a canonic order to proceed that i missed?? (first EoIP, after create bridge…).
What’s the definitive way to carry a /xx of addresses from a RB to another?? I think i’m right, but pse help me because i’m sure i miss something.
Thanks community,
.:[CRT]:. - playing ROS with Murphy laws.