EoIP over wireless while keeping the router management alive

RouterOS Wireless Networking
1

I have similar network topology:

Cisco_switch1[trunk_port] <-> [ether1]MikroTik1[wlan1] <-wireless_link-> [wlan1]MikroTik2[ether1] <-> [trunk_port]Cisco_switch2

I need to transport two VLAN’s from Cisco_switch1 to Cisco_switch2. I used EoIP feature according to this manual and both VLAN’s are visible in both Cisco switches, but the problem is, that I’m not able to access either the MikroTik1 or MikroTik2 after I have set up MikroTik1 facing port in Cisco_switch1 as a trunk. Is it possible to keep telnet/ssh access to MikroTik1 and MikroTik2 while having such EoIP setup? :unamused:

2

Add a vlan interface on ether1, bridge eoip with vlan and add ip address to bridge. That way you will be able to access mikrotik devices.